Swing barrier gate
Home > Products > Automatic turnstile gate > Swing barrier gate
WSG-Y606 Bridge Type Right-angled Swing Barrier Gate
General Introduction
Swing gate is an ideal passage access management device produced by our company after many years’ research and development .Our standard product ,made of stainless steel SUS 304,integrating with mechanism ,electron, microprocessor and various identification technology is compatible with card reader devices such as IC card, ID card, bar code, fingerprint and so on. By configuring all kinds of identification devices and adopting reliable safeguard devices, alarm devices, direction indicator etc, it is able to achieve access intelligetilized control and management.
Specifications
Housing material：304grade stainless steel (2.0 or
Length of arm：600
Arm`s running angle: 180degree
Swing direction: Single or double directions
Driving electromotor: DC brush electromotor (50W/ 24V)
Normal life-span: 5 million times
Power supply: AC220+(-)10% V/50+(-)10% Hz
Temperature:
Working environment: Indoor, outdoor (with a tent over)
Transit speed: 40persons/min (open close)25-30 persons/min(close often)
Open/close time: 2-3seconds
Starting time after power is on: 3 seconds
Automatic reset time after fault: 10 seconds
Communication interface: RS485 standard Distance less than 1200metres
Input interface: Dry contact signal or +12V level signal or pulse signal with width of more than 100ms, driving current: > 10mA
Functions & Features
With function of self-examine and alarm, it is convenient to maintain and use.
Being able to program operation status by the small keyboard in the main board
Preventing pedestrians from being nipped and from hurt
Arms are automatically locked until opening signal is received.
Arms synchronization (adjustable)
Automatically reset function: It will automatically lock if the pedestrian has not passed through the channel in the pre-set time after the opening. The passing time is adjustable.
Unit can be adjusted permanent open or close when power off to meet different requirement.
It can connect several card readers, relay signal can be received
One direction or bi-direction is optional
It can be directly controlled and managed by remote control.
Automatic prolong time reset, the default time is 10 seconds